R211x-HP Flexfabric 11900 Fundamentals Configuration Guide

155
flash:/feature1-r2111.bin
Running Version New Version
Release 2110 Release 2111
Chassis Slot Upgrade Way
1 5 Service Upgrade
Upgrading software images to compatible versions. Continue? [Y/N]: y
<Sysname> install activate feature flash:/feature1-r2111.bin chassis 1 slot 4
Upgrade summary according to following table:
flash:/feature1-r2111.bin
Running Version New Version
Release 2110 Release 2111
Chassis Slot Upgrade Way
1 4 Service Upgrade
Upgrading software images to compatible versions. Continue? [Y/N]: y
# Verify that the new image has been activated.
<Sysname> display install active
Active packages on chassis 1 slot 4:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2111.bin
Active packages on chassis 1 slot 5:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2111.bin
Active packages on chassis 2 slot 4:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2111.bin
Active packages on chassis 2 slot 5:
flash:/boot-r2110.bin
flash:/system-r2110.bin
flash:/feature1-r2111.bin
# Confirm the software change.
<Sysname> install commit
Feature rollback example
Rollback requirement
As shown in Figure 46, the IRF fabric has two members: the master member with the member ID 1 and
the subordinate member with the member ID 2. Each member has one MPU in slot 4 (active MPU) and
one MPU in slot 5 (standby MPU).
Roll back the feature1 feature from R2111 to R2110.