R211x-HP Flexfabric 11900 Fundamentals Configuration Guide

161
Please input the password.A
{ Method 3—After you type the last command keyword, type the start delimiter and part of the
banner and press Enter. At the system prompt, enter the rest of the banner and end the last line
with the same delimiter. For example, you can configure the banner "Have a nice day. Please
input the password." as follows:
<System> system-view
[System] header shell AHave a nice day.
Please input banner content, and quit with the character 'A'.
Please input the password.
A
Configuration procedure
To configure banners:
Ste
p
Command Remarks
1. Enter system view.
system-view
By default, no banner is
configured.
2. Configure the legal banner.
header legal text
By default, no banner is
configured.
3. Configure the MOTD banner.
header motd text
By default, no banner is
configured.
4. Configure the login banner.
header login text
By default, no banner is
configured.
5. Configure the incoming
banner.
header incoming text
By default, no banner is
configured.
6. Configure the shell banner.
header shell text
By default, no banner is
configured.
Setting the operating mode
The device can operate in the following modes:
• advance—Advanced mode.
• standard—Standard mode.
In different operating modes, the device supports different features, and might have different
specifications for the supported features. For example, the device supports FCoE only when it is
operating in advanced mode.
After changing the operating mode, you must reboot the device to make the device operate in the new
mode.
To set the operating mode of the device:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A