R211x-HP Flexfabric 11900 Fundamentals Configuration Guide

63
Ste
p
Command Remarks
3. Set a local
authentication
password for a user
role.
• In non-FIPS mode:
super password [ role
rolename ] [ { hash |
simple } password ]
• In FIPS mode:
super password [ role
rolename ]
Use this step for local password authentication.
By default, no password is configured.
If you log in to the default MDC and do not
specify a user role for the command, the
command sets a password for the user role
network-admin. If you log in to a non-default
MDC and do not specify a user role for the
command, the command sets a password for the
user role mdc-admin.
Obtaining temporary user role authorization
AUX or VTY users must pass authentication before they can use a user role that is not included in the user
account they are logged in with.
Perform the following task in user view:
Task Command Remarks
Obtain the temporary
authorization to use a
user role.
super [ rolename ]
The operation fails after three consecutive unsuccessful
password attempts.
The user role must have the permission to execute the
super command to obtain temporary user role
authorization.
Displaying RBAC settings
Execute display commands in any view.
Task Command
Display user role information. display role [ name role-name ]
Display user role feature
information.
display role feature [ name feature-name | verbose ]
Display user role feature group
information.
display role feature-group [ name feature-group-name ] [ verbose ]