R211x-HP Flexfabric 11900 Fundamentals Configuration Guide

83
Task Command Remarks
Display FTP connection status. status N/A
Display the system information of the FTP
server.
system N/A
Enable or disable FTP operation
information display.
verbose By default, this function is enabled.
Enable or disable FTP client debugging. debug
By default, FTP client debugging is
disabled.
Clear the reply information in the buffer. reset N/A
Terminating the FTP connection
Task Command Remarks
Terminate the connection to the FTP server
without exiting FTP client view.
• disconnect
• close
Use either command in FTP client view.
Terminate the connection to the FTP server
and return to user view.
• bye
• quit
Use either command in FTP client view.
Displaying command help information
To display command help information after you log in to the server:
Task Command Remarks
Display command help information.
• help [ command-name ]
• ? [ command-name ]
Use either command.
Displaying and maintaining FTP client
Execute the display command in any view.
Task Command
Display source IP address information on the FTP client. display ftp client source
FTP client configuration example in standalone
mode
Network requirements
• Use the device as the FTP client and the PC as the FTP server.