R211x-HP Flexfabric 11900 High Availability Command Reference

7
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
If you do not specify the interface keyword, this command displays the statistics for the critical Ethernet
OAM link events that occurred on all the ports of the switch.
Examples
# Display the statistics on critical Ethernet OAM link events occurred on all the ports.
<Sysname> display oam critical-event
----------- [Ten-GigabitEthernet1/0/1] -----------
Local link status : UP
Event statistics
Link fault : Not occurred
Dying gasp : Not occurred
Critical event : Not occurred
Table 4 Command output
Field Descri
p
tion
Ten-GigabitEthernet1/0/1 Information on Ten-GigabitEthernet 1/0/1.
Local link status Local link status, up or down.
Event statistics Statistics on critical Ethernet OAM link events.
Link fault Indicates whether a link fault is present.
Dying Gasp Indicates whether a fatal fault is present.
Critical Event Indicates whether a critical fault is present.
display oam link-event
Use display oam link-event to display the statistics on Ethernet OAM link error events occurred on a local
port or a peer port. Ethernet OAM link error events include errored symbol events, errored frame events,
errored frame period events, and errored frame seconds events.
Syntax
display oam link-event { local | remote } [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin