R211x-HP Flexfabric 11900 High Availability Command Reference

24
mdc-admin
Parameters
interval: Specifies the Ethernet OAM handshake packet transmission interval, in steps of 100 (in
milliseconds). The value range for this argument is 500 to 5000.
Usage guidelines
After the timeout timer of an Ethernet OAM connection expires, the local OAM entity ages out its
connection with the peer OAM entity, causing the OAM connection to disconnect. To keep the Ethernet
OAM connections stable, HP recommends setting the connection timeout timer to be at least five times
the handshake packet transmission interval.
The configuration in system view takes effect on all ports, but has a lower precedence than the
configuration in port view.
Examples
# Set the Ethernet OAM handshake packet transmission interval to 600 milliseconds.
<Sysname> system-view
[Sysname] oam global timer hello 600
Related commands
• display oam configuration
• oam timer hello
oam global timer keepalive
Use oam global timer keepalive to configure the global Ethernet OAM connection timeout timer.
Use undo oam global timer keepalive to restore the default.
Syntax
oam global timer keepalive interval
undo oam global timer keepalive
Default
The global Ethernet OAM connection timeout timer is 5000 milliseconds.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Specifies the Ethernet OAM connection timeout timer, in steps of 100 (in milliseconds). The value
range for this argument is 1000 to 25000.
Usage guidelines
After the timeout timer of an Ethernet OAM connection expires, the local OAM entity ages out its
connection with the peer OAM entity, causing the OAM connection to disconnect. To keep the Ethernet