R211x-HP Flexfabric 11900 High Availability Command Reference

25
OAM connections stable, HP recommends setting the connection timeout timer to be at least five times
the handshake packet transmission interval.
The configuration in system view takes effect on all ports, but has a lower precedence than the
configuration in port view.
Examples
# Set the Ethernet OAM connection timeout timer to 6000 milliseconds.
<Sysname> system-view
[Sysname] oam global timer keepalive 6000
Related commands
• display oam configuration
• oam timer keepalive
oam mode
Use oam mode to set the Ethernet OAM mode.
Use undo oam mode to restore the default.
Syntax
oam mode { active | passive }
undo oam mode
Default
An Ethernet OAM-enabled Ethernet port operates in the active Ethernet OAM mode.
Views
Layer 2 Ethernet port view, Layer 3 Ethernet port view
Predefined user roles
network-admin
mdc-admin
Parameters
active: Specifies the active Ethernet OAM mode.
passive: Specifies the passive Ethernet OAM mode.
Usage guidelines
To change the Ethernet OAM mode of an Ethernet OAM-enabled Ethernet port, first disable Ethernet
OAM on the port.
Examples
# Disable Ethernet OAM on Ten-GigabitEthernet 1/0/1, and then configure Ten-GigabitEthernet 1/0/1
to operate in passive Ethernet OAM mode.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] undo oam enable
[Sysname-Ten-GigabitEthernet1/0/1] oam mode passive