R211x-HP Flexfabric 11900 High Availability Command Reference

27
Default
The port uses the global setting.
Views
Layer 2 Ethernet port view, Layer 3 Ethernet port view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Specifies the Ethernet OAM handshake packet transmission interval, in steps of 100 (in
milliseconds). The value range for this argument is 500 to 5000.
Usage guidelines
After the timeout timer of an Ethernet OAM connection expires, the local OAM entity ages out its
connection with the peer OAM entity, causing the OAM connection to disconnect. To keep the Ethernet
OAM connections stable, HP recommends setting the connection timeout timer to be at least five times
the handshake packet transmission interval.
The configuration in port view takes effect on the specified port. For a port, the configuration in port view
takes precedence.
Examples
# Set the Ethernet OAM handshake packet transmission interval to 600 milliseconds.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] oam timer hello 600
Related commands
• display oam configuration
• oam global timer hello
oam timer keepalive
Use oam timer keepalive to configure the Ethernet OAM connection timeout timer.
Use undo oam timer keepalive to restore the default.
Syntax
oam timer keepalive interval
undo oam timer keepalive
Default
The port uses the global setting.
Views
Layer 2 Ethernet port view, Layer 3 Ethernet port view
Predefined user roles
network-admin