R211x-HP Flexfabric 11900 High Availability Command Reference

28
mdc-admin
Parameters
interval: Specifies the Ethernet OAM connection timeout timer, in steps of 100 (in milliseconds). The value
range for this argument is 1000 to 25000.
Usage guidelines
After the timeout timer of an Ethernet OAM connection expires, the local OAM entity ages out its
connection with the peer OAM entity, causing the OAM connection to disconnect. To keep the Ethernet
OAM connections stable, HP recommends setting the connection timeout timer to be at least five times
the handshake packet transmission interval.
The configuration in port view takes effect on the specified port. For a port, the configuration in port view
takes precedence.
Examples
# Set the Ethernet OAM connection timeout timer to 6000 milliseconds.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] oam timer keepalive 6000
Related commands
• display oam configuration
• oam global timer keepalive
reset oam
Use reset oam to clear the statistics on Ethernet OAM packets and Ethernet OAM link error events of an
Ethernet port.
Syntax
reset oam [ interface interface-type interface-number ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
If you do not specify the interface keyword, this command clears the statistics on Ethernet OAM packets
and Ethernet OAM link error events of all the ports.
Examples
# Clear the statistics on Ethernet OAM packets and Ethernet OAM link error events of all the ports.
<Sysname> reset oam