R211x-HP Flexfabric 11900 High Availability Command Reference

37
Parameters
mep mep-id: Specifies the ID of a MEP, in the range of 1 to 8191.
service-instance instance-id: Specifies the service instance ID in the range of 1 to 32767.
inbound: Creates an inward-facing MEP.
outbound: Creates an outward-facing MEP.
Usage guidelines
In creating a MEP, the service instance you specified defines the MD and MA to which the MEP belongs.
You cannot create a MEP if the MEP ID is not included in the MEP list of the relevant service instance.
Configurations in Ethernet interface view take effect only on the current interface; configurations in
aggregate interface view take effect on the aggregate interface and all its member ports; configurations
on a member port take effect only when the member port leaves the aggregation group.
Examples
# Configure a MEP list in service instance 5, and create and enable inward-facing MEP 3 in service
instance 5 on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] cfd md test_md level 3
[Sysname] cfd service-instance 5 ma-id vlan-based md test_md vlan 100
[Sysname] cfd meplist 3 service-instance 5
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] cfd mep 3 service-instance 5 outbound
Related commands
cfd meplist
cfd meplist
Use cfd meplist to create a MEP list, a collection of local MEPs allowed to be configured and the remote
MEPs to be monitored in the same MA.
Use undo cfd meplist to delete existing MEP lists.
Syntax
cfd meplist mep-list service-instance instance-id
undo cfd meplist mep-list service-instance instance-id
Default
No MEP list is created.
Views
System view
Predefined user roles
network-admin
mdc-admin