R211x-HP Flexfabric 11900 High Availability Command Reference

38
Parameters
meplist mep-list: Specifies a list of MEP IDs, indicating multiple MEPs, in the format of mep-list = { mep-id
[ to mep-id ] }&<1-10>, in which mep-id represents the MEP ID and is in the range of 1 to 8191. &<1-10>
indicates you can specify up to 10 MEP ID ranges.
service-instance instance-id: Specifies the service instance ID in the range of 1 to 32767.
Usage guidelines
Before creating a MEP list, create the relevant MD, MA, and service instance.
After you delete a MEP list, all local MEP configurations based on this list are deleted.
Examples
# Create a MEP list that includes MEP 9 through MEP 15 in service instance 5.
<Sysname> system-view
[Sysname] cfd md test_md level 3
[Sysname] cfd service-instance 5 ma-id vlan-based md test_md vlan 100
[Sysname] cfd meplist 9 to 15 service-instance 5
Related commands
• cfd md
• cfd service-instance
cfd mip-rule
Use cfd mip-rule to configure the rules for generating MIPs. The system automatically generates MIPs on
each port according to the rules configured.
Use undo cfd mip-rule to restore the default.
Syntax
cfd mip-rule { default | explicit } service-instance instance-id
undo cfd mip-rule [ default | explicit ] service-instance instance-id
Default
No rules for generating MIPs are configured and the system does not automatically generate any MIPs.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
default: Specifies the default rule. If no lower-level MIP exists on an interface, a MIP is created on the
current level. A MIP can be created even if no MEP is configured on the interface.
explicit: Specifies the explicit rule. If no lower-level MIP exists and a lower-level MEP exists on an interface,
a MIP is created at the current level. A MIP can be created only when a lower-level MEP is created on the
interface.
service-instance instance-id: Specifies the service instance ID in the range of 1 to 32767.