R211x-HP Flexfabric 11900 High Availability Command Reference

39
Examples
# Configure the MIP generation rule as default in service instance 5.
<Sysname> system-view
[Sysname] cfd mip-rule default service-instance 5
cfd service-instance
Use cfd service-instance to create a service instance with the MD name.
Use undo cfd service-instance to remove the service instance.
Syntax
cfd service-instance instance-id ma-id { icc-based icc-name | integer ma-num | string ma-name |
vlan-based [ vlan-id ] } [ ma-index index-value ] md md-name vlan vlan-id
undo cfd service-instance instance-id
Default
No service instance exists.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
service-instance instance-id: Specifies a service instance by its ID in the range of 1 to 32767.
ma-id: Creates an MA.
icc-based icc-name: Specifies that an MA is identified by an ICC. The icc-name argument is a string of 1
to 13 characters.
integer ma-num: Specifies that an MA is identified by an integer, where ma-num is in the range of 0 to
65535.
string ma-name: Specifies that an MA is identified by a string, where ma-name is string of 1 to 45
characters that can contain letters, numbers, and special characters such as grave accent (`), tilde (~),
exclamation mark (!), at sign (@), number sign (#), dollar sign ($), percent (%), caret (^), ampersand (&),
asterisk(*), brackets ({ }, ( ),[ ], < >), hyphen (-), underscore (_), plus (+), equal sign (=), vertical bar (|),
colon (:), semicolon (;), quotation mark ('), comma (,), period (.), and slash (/).
vlan-based [ vlan-id ]: Specifies that an MA is identified by a VLAN ID, where vlan-id is in the range of
1 to 4094. If you do not provide the vlan-id argument, the VLAN ID specified by vlan vlan-id is used. If
the vlan vlan-id option is not provided, you must specify the vlan-id argument for the vlan-based [ vlan-id ]
option.
ma-index index-value: Specifies an MA index in the range of 1 to 4294967295. If this option is not
specified, the system automatically assigns the smallest index number that is not in use. HP recommends
using the index automatically assigned by the system.
md md-name: Specifies the name of an MD. The md-name argument is a string of 1 to 43 characters that
can contain letters, numbers, and special characters such as grave accent (`), tilde (~), exclamation mark
(!), at sign (@), number sign (#), dollar sign ($), percent (%), caret (^), ampersand (&), asterisk(*),