R211x-HP Flexfabric 11900 High Availability Command Reference

44
display cfd mep
Use display cfd mep to display the attribute and operating information of a MEP.
Syntax
display cfd mep mep-id service-instance instance-id
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
mep mep-id: Specifies a MEP by its ID in the range of 1 to 8191.
service-instance instance-id: Specifies a service instance by its ID in the range of 1 to 32767.
Usage guidelines
The neighbor of an inward-facing MEP is the neighbor of the service instance corresponding to the MEP.
Examples
# Display the attribute and operating information of MEP 50 in service instance 1.
<Sysname> display cfd mep 50 service-instance 1
Interface: Ten-GigabitEthernet1/0/2
Maintenance domain: md_0
Maintenance domain index: 1
Maintenance association: ma_0
Maintenance association index: 1
Level: 0 VLAN: 1 Direction: Outbound
Current state: Active CCM send: Enable
FNG state: FNG_DEFECT_REPORTED
CCM:
Current state: CCI_WAITING
Interval: 1s SendCCM: 12018
Loopback:
NextSeqNumber: 8877
SendLBR: 0 ReceiveInOrderLBR: 0 ReceiveOutOrderLBR: 0
Linktrace:
NextSeqNumber: 8877
SendLTR: 0 ReceiveLTM: 0
No CCM received from some remote MEPs.