R211x-HP Flexfabric 11900 High Availability Command Reference

47
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
service-instance instance-id: Specifies a service instance by its ID in the range of 1 to 32767. If this option
is not specified, MEP lists in all service instances are displayed.
Examples
# Display the MEP list in service instance 5.
<Sysname> display cfd meplist service-instance 5
Service instance: 5
MEP list: 1 to 20, 30, 50.
display cfd mp
Use display cfd mp to display the MP information.
Syntax
display cfd mp [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Displays the MP information on a port specified by its port
type and port number. If this option is not specified, MP information on all ports is displayed.
Usage guidelines
The output is arranged by port name. On a port, the output shows MPs that serve VLANs, and then shows
MPs that do not serve any VLANs. The MPs that serve VLANs are displayed in the ascending VLAN ID
order. Within the same VLAN, the output is in the order of MIPs and MEPs (from high to low level). The
MEPs that do not serve any VLANs are displayed by level (from high to low).
Examples
# Display the MP information on all ports.
<Sysname> display cfd mp
Interface Ten-GigabitEthernet1/0/1 VLAN 100