R211x-HP Flexfabric 11900 High Availability Command Reference

49
mdc-operator
Parameters
service-instance instance-id: Specifies the service instance ID in the range of 1 to 32767.
mep mep-id: Specifies the ID of a remote MEP, in the range of 1 to 8191.
Examples
# Display information about remote MEP 10 in service instance 4.
<Sysname> display cfd remote-mep service-instance 4 mep 10
MEP ID MAC address State Time MAC status
20 00e0-fc00-6565 OK 2013/03/06 02:36:38 UP
30 00e0-fc27-6502 OK 2013/03/06 02:36:38 DOWN
40 00e0-fc00-6510 FAILED 2013/03/06 02:36:39 DOWN
50 00e0-fc52-baa0 OK 2013/03/06 02:36:44 DOWN
60 0010-fc00-6502 OK 2013/03/06 02:36:42 DOWN
Table 14 Command output
Field Descri
p
tion
MEP ID ID of the remote MED.
MAC address
MAC address of the remote MEP device.
If this field is not supported, a hyphen (-) is displayed.
State Running state of the remote MEP, OK or FAILED.
Time Time when the remote MEP entered the FAILED or OK state for the last time.
MAC status
State of the interface indicated by the last CCM received from the remote
MEP:
• UP—The interface is ready to pass packets.
• DOWN—The interface cannot pass packets.
• TESTING—The interface is in some test mode.
• UNKNOWN—The interface status cannot be determined.
• DORMANT—The interface is not in a state to pass packets. Instead, it is in
a pending state, waiting for some external event.
• NOT-PRESENT—Some component of the interface is missing.
• LLD—The interface is down due to state of the lower layer interfaces.
If this field is not supported, a hyphen (-) is displayed.
display cfd service-instance
Use display cfd service-instance to display the configuration information of service instance.
Syntax
display cfd service-instance [ instance-id ]
Views
Any view
Predefined user roles
network-admin