R211x-HP Flexfabric 11900 High Availability Command Reference

50
network-operator
mdc-admin
mdc-operator
Parameters
instance-id: Specifies a service instance ID in the range of 1 to 32767. If this argument is not specified,
the configuration information of all service instances is displayed.
Examples
# Display the configuration information of all service instances.
<Sysname> display cfd service-instance
Service instances configured (2 in total):
Service instance 5:
Maintenance domain: md_5
Maintenance domain index: 5
Maintenance association: ma_5
Maintenance association index: 5
Level: 5 VLAN: 5 MIP rule: NONE CCM interval: 1s Direction: Inbound
MEP ID: 730 Interface: Ten-GigabitEthernet1/0/1
Service instance 6:
Maintenance domain: (Without ID)
Maintenance domain index: 6
Maintenance association: ma_6
Maintenance association index: 6
Level: 6 VLAN: 6 MIP rule: NONE CCM interval: 1s Direction: Outbound
MEP ID: 731 Interface: Ten-GigabitEthernet1/0/2
Table 15 Command output
Field Descri
p
tion
Service instances are configured. Number of service instances configured.
Service instance Service instance ID.
Maintenance domain
MD of the service instances. (If the MD does not have a name,
this field displays Without ID.)
Maintenance domain index Index of the MD to which the service instances belong.
Maintenance association: MA of the service instances.
Maintenance association index Index of the MA to which the service instances belong.
Level MD level.
VLAN VLAN to which the MA belongs.
MIP rule MIP generation rules configured on service instance.
CCM interval Interval to send CCMs.
Direction Direction of the MEPs configured on the service instance.
MEP ID ID of MEPs configured on the service instance.
Interface Interface of the MEP configured on the service instance.