R211x-HP Flexfabric 11900 High Availability Command Reference

54
Syntax
display dldp statistics [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
If no port is specified, this command displays the statistics on the DLDP packets passing through all the
DLDP-enabled ports.
Examples
# Display the statistics on the DLDP packets passing through all the DLDP-enabled ports.
<Sysname> display dldp statistics
Interface Ten-GigabitEthernet1/0/1
Packets sent: 6
Packets received: 5
Invalid packets received: 2
Loopback packets received: 0
Authentication-failed packets received: 0
Valid packets received: 3
Interface Ten-GigabitEthernet1/0/2
Packets sent: 7
Packets received: 7
Invalid packets received: 3
Loopback packets received: 0
Authentication-failed packets received: 0
Valid packets received: 4
Table 17 Command output
Field Descri
p
tion
Interface Port index.
Packets sent Total number of DLDP packets sent.
Packets received Total number of DLDP packets received.
Invalid packets received Number of the invalid packets received.
Loop packets received Number of the loopback packets received.
Authentication failed packets received Number of the received packets that failed to pass the authentication.