R211x-HP Flexfabric 11900 High Availability Command Reference

59
• dldp enable
dldp interval
Use dldp interval to set the interval for sending Advertisement packets.
Use undo dldp interval to restore the default.
Syntax
dldp interval time
undo dldp interval
Default
The interval for sending Advertisement packets is 5 seconds.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
time: Specifies Advertisement packets sending interval in the range of 1 to 100 seconds.
Usage guidelines
This command applies to all DLDP-enabled ports.
To enable DLDP to operate correctly, make sure the intervals for sending Advertisement packets
configured on the two ends of a link are the same.
Examples
# Set the interval for sending Advertisement packets to 20 seconds.
<Sysname> system-view
[Sysname] dldp interval 20
Related commands
display dldp
dldp unidirectional-shutdown
Use dldp unidirectional-shutdown to set the port shutdown mode.
Use undo dldp unidirectional-shutdown to restore the default.
Syntax
dldp unidirectional-shutdown { auto | manual }
undo dldp unidirectional-shutdown
Default
The port shutdown mode is auto mode.