R211x-HP Flexfabric 11900 High Availability Command Reference

2
OAM mode : Active
PDU : ANY
Mux action : FWD
Par action : FWD
Flags
Link fault : Not occurred
Dying gasp : Not occurred
Critical event : Not occurred
Local evaluating : COMPLETE
Remote evaluating : COMPLETE
Packets statistics
Packet type Sent Received
-----------------------------------------------------------------
OAMPDU 100 80
OAMInformation 64 60
OAMEventNotification 36 20
OAMUniqueEventNotification 36 10
OAMDuplicateEventNotification 0 10
Table 1 Command output
Field Descri
p
tion
Ten-GigabitEthernet1/0/1 Information on Ten-GigabitEthernet 1/0/1.
Enable status Ethernet OAM state (enabled or disabled).
Loopback status
Ethernet OAM loopback state:
• No loopback.
• Remote loopback.
• Local loopback.
Link status Link state (UP or DOWN).
OAM mode
Local Ethernet OAM mode:
• Active—The port is operating in active Ethernet OAM mode.
• Passive—The port is operating in passive Ethernet OAM mode.
PDU
The way in which the local end processes Ethernet OAMPDUs:
• RX_INFO—The port only receives Information OAMPDUs and does not
send any Ethernet OAMPDUs.
• LF_INFO—The port only sends the Information OAMPDUs without
Information TLV triplets and with their link error flag bits being set.
• INFO—The port sends and receives only Information OAMPDUs.
• ANY—The port sends and receives Ethernet OAMPDUs of any type.
Mux action
Operating mode of the local transmitter:
• FWD—The port can send any packets.
• DISCARD—The port only sends Ethernet OAMPDUs.
Par action
Operating mode of the local receiver:
• FWD—The port can receive any packets.
• DISCARD—The port only receives Ethernet OAMPDUs.
Flags Local flags inserted in the local flag fields of the Ethernet OAMPDUs sent.