R211x-HP Flexfabric 11900 High Availability Command Reference

68
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] undo vrrp check-ttl enable
vrrp dscp
Use vrrp dscp to configure a DSCP value for VRRP packets.
Use undo vrrp dscp to restore the default.
Syntax
vrrp dscp dscp-value
undo vrrp dscp
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
dscp-value: Specifies a DSCP value for VRRP packets, in the range of 0 to 63. The default is 48.
Usage guidelines
The DSCP value identifies the packet priority during transmission. A greater DSCP value means a higher
packet priority.
Examples
# Configure the DSCP value for VRRP packets as 30.
<Sysname> system-view
[Sysname] vrrp dscp 30
vrrp version
Use vrrp version to specify the version of IPv4 VRRP on an interface.
Use undo vrrp version to restore the default.
Syntax
vrrp version version-number
undo vrrp version
Default
VRRPv3 is used.
Views
Interface view
Predefined user roles
network-admin
mdc-admin