R211x-HP Flexfabric 11900 High Availability Command Reference

73
Examples
# Disable IPv4 VRRP group 1.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp vrid 1 shutdown
vrrp vrid source-interface
Use vrrp vrid source-interface to specify the source interface for an IPv4 VRRP group. This interface,
instead of the interface where the VRRP group resides, sends and receives VRRP packets.
Use undo vrrp source-interface to cancel the specified source interface.
Syntax
vrrp vrid virtual-router-id source-interface interface-type interface-number
undo vrrp vrid virtual-router-id source-interface
Default
No source interface is specified for a VRRP group. The interface where the VRRP group resides sends and
receives VRRP packets.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
virtual-router-id: Specifies an IPv4 VRRP group by its virtual router ID in the range of 1 to 255.
interface-type interface-number: Specifies an interface by its type and number.
Usage guidelines
If VRRP group members cannot exchange VRRP packets through the interfaces where the VRRP group
resides, you can use this command to enable VRRP packet exchange among VRRP group members
through the specified source interfaces.
Examples
# Specify VLAN-interface 20 as the source interface for VRRP packet exchange in IPv4 VRRP group 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] vrrp vrid 10 source-interface vlan-interface 20
vrrp vrid timer advertise
Use vrrp vrid timer advertise to configure the interval at which the master in an IPv4 VRRP group sends
VRRP advertisements.
Use undo vrrp vrid timer advertise to restore the default.