R211x-HP Flexfabric 11900 High Availability Command Reference

77
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp vrid 1 virtual-ip 10.10.10.10
[Sysname-Vlan-interface2] vrrp vrid 1 virtual-ip 10.10.10.11
Related commands
display vrrp
IPv6 VRRP commands
display vrrp ipv6
Use display vrrp ipv6 to display the states of IPv6 VRRP groups.
Syntax
display vrrp ipv6 [ interface interface-type interface-number [ vrid virtual-router-id ] ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
vrid virtual-router-id: Specifies an IPv6 VRRP group by its virtual router ID in the range of 1 to 255.
verbose: Displays detailed IPv6 VRRP group information. If the verbose keyword is not specified, this
command displays brief IPv6 VRRP group information.
Usage guidelines
• If no interface or VRRP group is specified, this command displays the states of all IPv6 VRRP groups.
• If only an interface is specified, this command displays the states of all IPv6 VRRP groups on the
specified interface.
• If both an interface and an IPv6 VRRP group are specified, this command displays the states of the
specified IPv6 VRRP group on the specified interface.
Examples
# Display brief information about all IPv6 VRRP groups on the device when VRRP operates in standard
mode.
<Sysname> display vrrp ipv6
IPv6 Virtual Router Information:
Running Mode : Standard
Total number of virtual routers : 1
Interface VRID State Running Adver Auth Virtual
Pri Timer Type IP