R211x-HP Flexfabric 11900 High Availability Command Reference

78
---------------------------------------------------------------------
Vlan2 1 Master 150 100 None FE80::10
Table 21 Command output (in standard mode)
Field Descri
p
tion
Running Mode VRRP operating mode (standard mode).
Total number of virtual routers Total number of VRRP groups.
Interface Interface where the VRRP group is configured.
VRID Virtual router ID (VRRP group number).
State
Status of the router in the VRRP group:
• Master.
• Backup.
• Initialize.
• Inactive.
Running Pri
Current priority of the router.
When a track entry is associated with a VRRP group on the router, the
router's priority changes when the track entry's status changes.
Adver Timer VRRP advertisement sending interval in centiseconds.
Auth Type
Authentication type. Only "none" is available, which means no
authentication is required.
Virtual IP Virtual IP address of the VRRP group.
# Display detailed information about all IPv6 VRRP groups on the device when VRRP operates in
standard mode.
<Sysname> display vrrp ipv6 verbose
IPv6 Virtual Router Information:
Running Mode : Standard
Total number of virtual routers : 2
Interface Vlan-interface2
VRID : 1 Adver Timer : 100
Admin Status : Up State : Master
Config Pri : 150 Running Pri : 150
Preempt Mode : Yes Delay Time : 10
Auth Type : None
Virtual IP : FE80::10
1::10
Virtual MAC : 0000-5e00-0201
Master IP : FE80::1
VRRP Track Information:
Track Object : 1 State : Positive Pri Reduced : 50
Interface Vlan-interface2
VRID : 11 Adver Timer : 100
Admin Status : Up State : Backup
Config Pri : 80 Running Pri : 80
Preempt Mode : Yes Delay Time : 0
Become Master : 2450ms left