R211x-HP Flexfabric 11900 High Availability Command Reference

80
Field Descri
p
tion
Pri Reduced
Value by which the priority decreases when the status of the associated
track entry becomes negative.
Switchover
Switchover mode. When the status of the associated track entry becomes
negative, the backup immediately becomes the master.
display vrrp ipv6 statistics
Use display vrrp ipv6 statistics to display statistics for IPv6 VRRP groups.
Syntax
display vrrp ipv6 statistics [ interface interface-type interface-number [ vrid virtual-router-id ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
vrid virtual-router-id: Specifies an IPv6 VRRP group by its virtual router ID in the range of 1 to 255.
Usage guidelines
• If no interface or VRRP group is specified, this command displays statistics for all IPv6 VRRP groups.
• If only an interface is specified, this command displays statistics for all IPv6 VRRP groups on the
specified interface.
• If both an interface and an IPv6 VRRP group are specified, this command displays statistics for the
specified IPv6 VRRP group on the specified interface.
You can use the reset vrrp ipv6 statistics command to clear statistics for IPv6 VRRP groups.
Examples
# Display statistics for all IPv6 VRRP groups when VRRP operates in standard mode.
<Sysname> display vrrp ipv6 statistics
Interface : Vlan-interface2
VRID : 1
CheckSum Errors : 0 Version Errors : 0
Invalid Pkts Rcvd : 0 Unexpected Pkts Rcvd : 0
Hop Limit Errors : 0 Advertisement Interval Errors : 0
Invalid Auth Type : 0 Auth Failures : 0
Packet Length Errors : 0 Auth Type Mismatch : 0
Become Master : 1 Address List Errors : 0
Adver Rcvd : 0 Priority Zero Pkts Rcvd : 0
Adver Sent : 425 Priority Zero Pkts Sent : 0