R211x-HP Flexfabric 11900 High Availability Command Reference

82
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
vrid virtual-router-id: Specifies an IPv6 VRRP group by its virtual router ID in the range of 1 to 255.
Usage guidelines
• If no interface or VRRP group is specified, this command clears statistics for all IPv6 VRRP groups.
• If only an interface is specified, this command clears statistics for all IPv6 VRRP groups on the
specified interface.
• If both an interface and an IPv6 VRRP group are specified, this command clears statistics for the
specified IPv6 VRRP group on the specified interface.
Examples
# Clear statistics for all IPv6 VRRP groups on all interfaces.
<Sysname> reset vrrp ipv6 statistics
Related commands
display vrrp ipv6 statistics
vrrp ipv6 dscp
Use vrrp ipv6 dscp to configure a DSCP value for IPv6 VRRP packets.
Use undo vrrp ipv6 dscp to restore the default.
Syntax
vrrp ipv6 dscp dscp-value
undo vrrp ipv6 dscp
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
dscp-value: Specifies a DSCP value for IPv6 VRRP packets, in the range of 0 to 63. The default is 56.
Usage guidelines
The DSCP value identifies the packet priority during transmission. A greater DSCP value means a higher
packet priority.