R211x-HP Flexfabric 11900 High Availability Configuration Guide

78
Step Command Remarks
4. Associate Track with IPv6
PBR.
apply next-hop [ vpn-instance
vpn-instance-name | inbound-vpn ]
{ ipv6-address [ direct ] [ track
track-entry-number ] }&<1-n>
N/A
Displaying and maintaining track entries
Execute the display command in any view.
Task Command
Display information about a specific or all track entries. display track { track-entry-number | all }
Track configuration examples
VRRP-Track-NQA collaboration configuration example
In this example, the master monitors the uplink.
Network requirements
As shown in Figure 21, configure Host A to access Host B on the Internet. The default gateway of Host A
i s 10 .1.1.10 / 24 .
Switch A and Switch B belong to VRRP group 1, whose virtual IP address is 10.1.1.10.
When Switch A works correctly, packets from Host A to Host B are forwarded through Switch A. When
VRRP finds that a fault is on the uplink of Switch A through NQA, packets from Host A to Host B are
forwarded through Switch B.
Figure 21 Network diagram