R211x-HP Flexfabric 11900 IP Multicast Command Reference

94
Parameters
size: Sets the maximum size (in bytes) of each join/prune message, in the range of 100 to 8100.
Examples
# Set the maximum size of each join/prune message to 1500 bytes on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] jp-pkt-size 1500
pim
Use pim to enter PIM view.
Use undo pim to remove all configurations in PIM view.
Syntax
pim [ vpn-instance vpn-instance-name ]
undo pim [ vpn-instance vpn-instance-name ]
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If this option is not specified, you enter public network PIM view.
Examples
# Enable IP multicast routing on the public network and enter public network PIM view.
<Sysname> system-view
[Sysname] multicast routing
[Sysname-mrib] quit
[Sysname] pim
[Sysname-pim]
# Enable IP multicast routing in VPN instance mvpn and enter PIM view of VPN instance mvpn.
<Sysname> system-view
[Sysname] multicast routing vpn-instance mvpn
[Sysname-mrib-mvpn] quit
[Sysname] pim vpn-instance mvpn
[Sysname-pim-mvpn]
Related commands
multicast routing-enable