R211x-HP Flexfabric 11900 IP Multicast Command Reference

4
Related commands
reset igmp-snooping group
display igmp-snooping router-port
Use display igmp-snooping router-port to display information about dynamic router ports.
Syntax
In standalone mode:
display igmp-snooping
router-port [ vlan vlan-id ] [ slot slot-number ]
In IRF mode:
display igmp-snooping
router-port [ vlan vlan-id ] [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays
information about the dynamic router ports on the MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on a member device. The chassis-number
argument specifies an IRF member device ID, and the slot-number argument specifies a card by its slot
number. If no member device is specified, this command displays information about the dynamic router
ports on all MPUs in the IRF fabric. (In IRF mode.)
Examples
# Display information about the dynamic router ports in VLAN 2.
<Sysname> display igmp-snooping router-port vlan 2
VLAN 2:
Router slots (1 in total):
1
Router ports (2 in total):
XGE1/0/1
XGE1/0/2
Table 3 Command output
Field Descri
p
tion
VLAN 2 VLAN ID.
Router slots (1 in total)
Total number of cards where the dynamic router ports reside and the slot IDs of the
cards.