R211x-HP Flexfabric 11900 IP Multicast Command Reference

103
mdc-admin
Examples
# Enable VLAN-interface 100 to drop hello messages without the generation ID options.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim require-genid
pim sm
Use pim sm to enable PIM-SM.
Use undo pim sm to disable PIM-SM.
Syntax
pim sm
undo pim sm
Default
PIM-SM is disabled.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command takes effect only after you enable IP multicast routing in the public network or VPN
instance.
Examples
# On the public network, enable IP multicast routing, and enable PIM-SM on VLAN-interface 100.
<Sysname> system-view
[Sysname] multicast routing
[Sysname-mrib] quit
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim sm
Related commands
multicast routing
pim state-refresh-capable
Use pim state-refresh-capable to enable the state refresh feature on the interface.
Use undo pim state-refresh-capable to disable the state refresh feature.
Syntax
pim state-refresh-capable