R211x-HP Flexfabric 11900 IP Multicast Command Reference

104
undo pim state-refresh-capable
Default
The state refresh feature is enabled.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Examples
# Disable state refresh on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] undo pim state-refresh-capable
Related commands
• state-refresh-interval (PIM view)
• state-refresh-rate-limit (PIM view)
• state-refresh-ttl (PIM view)
pim timer graft-retry
Use pim timer graft-retry to set the graft retry timer.
Use undo pim timer graft-retry to restore the default.
Syntax
pim timer graft-retry interval
undo pim timer graft-retry
Default
The graft retry timer is 3 seconds.
Views
Interface view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Specifies a graft retry timer (in seconds), in the range of 1 to 65535.
Examples
# Set the graft retry timer to 80 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim timer graft-retry 80