R211x-HP Flexfabric 11900 IP Multicast Command Reference

5
Field Descri
p
tion
Router ports (2 in total) Total number of dynamic router ports and the port list.
Related commands
reset igmp-snooping router-port
display igmp-snooping static-group
Use display igmp-snooping static-group to display information about static IGMP snooping forwarding
entries.
Syntax
In standalone mode:
display igmp-snooping static
-group [ group-address | source-address ] * [ vlan vlan-id ] [ verbose ] [ slot
slot-number ]
In IRF mode:
display igmp-snooping static
-group [ group-address | source-address ] * [ vlan vlan-id ] [ verbose ]
[ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
group-address: Specifies a multicast group by its IP address in the range of 224.0.1.0 to
239.255.255.255. If no multicast group is specified, this command displays information about the static
IGMP snooping forwarding entries for all multicast groups.
source-address: Specifies a multicast source by its IP address. If no multicast source is specified, this
command displays information about the static IGMP snooping forwarding entries for all multicast
sources.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. If no VLAN is
specified, this command displays information about the static IGMP snooping forwarding entries for all
VLANs.
verbose: Displays detailed information.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays
information about static IGMP snooping forwarding entries on the MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on a member device. The chassis-number
argument specifies an IRF member device ID, and the slot-number argument specifies a card by its slot
number. If no member device is specified, this command displays information about the static IGMP
snooping forwarding entries on all MPUs in the IRF fabric. (In IRF mode.)