R211x-HP Flexfabric 11900 IP Multicast Command Reference

115

Views

PIM view

Predefined user roles

network-admin

mdc-admin

Parameters

interval: Sets the interval (in seconds) for sending hello messages, in the range of 0 to 18000. If the value

for this argument is 0, no hello messages are sent.

Usage guidelines

You can set the interval for sending hello messages in PIM view or interface view. The configurations

made in PIM view are effective on all interfaces, and the configurations made in interface view are

effective on only the current interface. If you set the interval in both PIM view and interface view, the

configuration in interface view always takes precedence.

Examples

# Set the global interval for sending hello messages to 40 seconds on the public network.

<Sysname> system-view

[Sysname] pim

[Sysname-pim] timer hello 40

Related commands

pim timer hello

timer join-prune (PIM view)

Use timer join-prune to set the global interval for sending join/prune messages.

Use undo timer join-prune to restore the default.

Syntax

timer join-prune interval

undo timer join-prune

Default

The global interval for sending join/prune messages is 60 seconds.