R211x-HP Flexfabric 11900 IP Multicast Command Reference

116
Usage guidelines
You can set the interval for sending join/prune messages in PIM view or interface view. The
configurations made in PIM view are effective on all interfaces, and the configurations made in interface
view are effective on only the current interface. If you set the interval in both PIM view and interface view,
the configuration in interface view always takes precedence.
Examples
# Set the global interval for sending join/prune messages to 80 seconds on the public network.
<Sysname> system-view
[Sysname] pim
[Sysname-pim] timer join-prune 80
Related commands
pim timer join-prune