R211x-HP Flexfabric 11900 IP Multicast Command Reference

118
VLAN 2: Total 1 IP entries.
(::, FF1E::101)
Attribute: static, success
Host slots (1 in total):
1
Host ports (1 in total):
XGE1/0/1 (S, SUC)
Table 32 Command output
Field Descri
p
tion
Total 1 entries Total number of Layer 2 IPv6 multicast groups.
VLAN 2: Total 1 IP entries Total number of Layer 2 IPv6 multicast groups in VLAN 2.
(::, FF1E::101)
(S, G) entry. If the IPv6 multicast source is not specified, the field in the S
position displays double colons (::).
Attribute
Entry attribute:
• dynamic—The entry is created by a dynamic protocol.
• static—The entry is created by a static protocol.
• pim—The entry is created by IPv6 PIM.
• kernel—The entry is obtained from the kernel.
• success—Processing succeeds.
• fail—Processing fails.
Host slots (1 in total)
Total number of cards where the member ports reside and the slot IDs of the
cards.
Host ports (1 in total) Total number of member ports and the port list.
(S, SUC)
Port attribute:
• D—Dynamic port.
• S—Static port.
• P—IPv6 PIM port.
• K—Port obtained from the kernel.
• R—Port learned from (*, *) entries.
• W—Port learned from (*, G) entries.
• SUC—Processing succeeds.
• F—Processing fails.
display ipv6 l2-multicast ip forwarding
Use display ipv6 l2-multicast ip forwarding to display information about Layer 2 IPv6 multicast group
entries.
Syntax
In standalone mode:
display ipv6 l2-multicast ip forwarding [ group ipv6-group-address | source ipv6-source-address ] *
[ vlan vlan-id ] [ slot slot-number ]
In IRF mode: