R211x-HP Flexfabric 11900 IP Multicast Command Reference

121
Attribute: success
Host slots (1 in total):
1
Host ports (1 in total):
XGE1/0/1
Table 34 Command output
Field Descri
p
tion
Total 1 MAC entries Total number of Layer 2 IPv6 MAC multicast groups.
VLAN 2: Total 1 MAC entries Total number of Layer 2 IPv6 MAC multicast groups in VLAN 2.
MAC group address IPv6 address of the Layer 2 Ipv6 MAC multicast group.
Attribute
Entry attribute:
• success—Processing succeeds.
• fail—Processing fails.
Host slots (1 in total)
Total number of cards where member ports reside and the slot IDs of the
cards.
Host ports (1 in total) Total number of member ports and the port list.
display ipv6 l2-multicast mac forwarding
Use display ipv6 l2-multicast mac forwarding to display information about IPv6 MAC multicast group
entries.
Syntax
In standalone mode:
display ipv6 l2-multicast mac forwarding [ mac-address ] [ vlan vlan-id ] [ slot slot-number ]
In IRF mode:
display ipv6 l2-multicast mac forwarding [ mac-address ] [ vlan vlan-id ] [ chassis chassis-number slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
mac-address: Specifies an IPv6 MAC multicast group by its IPv6 MAC address. If no IPv6 MAC multicast
group is specified, this commands displays information about the IPv6 MAC multicast group entries for
all IPv6 MAC multicast groups.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. If no VLAN is
specified, this command displays information about the IPv6 MAC multicast group entries for all VLANs.