R211x-HP Flexfabric 11900 IP Multicast Command Reference

6
Examples
# Display information about the static IGMP snooping forwarding entries in VLAN 2.
<Sysname> display igmp-snooping static-group vlan 2
Total 1 entries.
VLAN 2: Total 1 entries.
(0.0.0.0, 224.1.1.1)
Host slots (1 in total):
1
Host ports (1 in total):
XGE1/0/2
Table 4 Command output
Field Descri
p
tion
Total 1 entries Total number of static IGMP snooping forwarding entries.
VLAN 2: Total 1 entries Total number of static IGMP snooping forwarding entries in VLAN 2.
(0.0.0.0, 224.1.1.1)
(S, G) entry. If the multicast source is not specified, the field in the S position
displays 0.0.0.0.
Host slots (1 in total)
Total number of cards where the member ports reside and the slot IDs of the
cards.
Host ports (1 in total) Total number of member ports and the port list.
display igmp-snooping static-router-port
Use display igmp-snooping static-router-port to display information about static router ports.
Syntax
In standalone mode:
display igmp-snooping
static-router-port [ vlan vlan-id ] [ slot slot-number ]
In IRF mode:
display igmp-snooping
static-router-port [ vlan vlan-id ] [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays
information about the static router ports on the MPU. (In standalone mode.)