R211x-HP Flexfabric 11900 IP Multicast Command Reference

124
Field Descri
p
tion
Host-aging-time Aging timer for the dynamic member port.
Router-aging-time Aging timer for the dynamic router port.
Max-response-time Maximum time for responding to MLD general queries.
Last-listener-query-interval Interval for sending MLD multicast-address-specific queries.
Report-aggregation
Status of MLD report suppression:
• Enabled.
• Disabled.
display mld-snooping group
Use display mld-snooping group to display information about dynamic MLD snooping forwarding
entries.
Syntax
In standalone mode:
display mld-snooping
group [ ipv6-group-address | ipv6-source-address ] * [ vlan vlan-id ] [ verbose ]
[ slot slot-number ]
In IRF mode:
display mld-snooping
group [ ipv6-group-address | ipv6-source-address ] * [ vlan vlan-id ] [ verbose ]
[ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address. The value range for this
argument is FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y"
represent any hexadecimal numbers from 0 to F. If no IPv6 multicast group is specified, this command
displays information about the dynamic MLD snooping forwarding entries for all IPv6 multicast groups.
ipv6-source-address: Specifies an IPv6 multicast source by its IPv6 address. If no multicast source is
specified, this command displays information about the dynamic MLD snooping forwarding entries for
all IPv6 multicast sources.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. If no VLAN is
specified, this command displays information about the dynamic MLD snooping forwarding entries for
all VLANs.
verbose: Displays detailed information.