R211x-HP Flexfabric 11900 IP Multicast Command Reference

125
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays
information about the dynamic MLD snooping forwarding entries on MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on a member device. The chassis-number
argument specifies the IRF member device ID, and the slot-number argument specifies the number of the
slot where the card resides. If no member device is specified, this command displays information about
the dynamic MLD snooping forwarding entries on all MPUs in the IRF fabric. (In IRF mode.)
Examples
# Display information about the dynamic MLD snooping forwarding entries in VLAN 2.
<Sysname> display mld-snooping group vlan 2
Total 1 entries.
VLAN 2: Total 1 entries.
(::,FF1E::101)
Host slots (1 in total):
1
Host ports (1 in total):
XGE1/0/2
Table 37 Command output
Field Descri
p
tion
Total 1 entries Total number of dynamic MLD snooping forwarding entries.
VLAN 2: Total 1 entries Total number of dynamic MLD snooping forwarding entries in VLAN.
(::, FF1E::101)
(S, G) entry. If the IPv6 multicast source is not specified, the field in the S position
displays double colons (::).
Host slots (1 in total)
Total number of cards where the member ports reside and the slot IDs of the
cards.
Host ports (1 in total) Total number of member ports and the port list.
Related commands
reset mld-snooping group
display mld-snooping router-port
Use display mld-snooping router-port to display information about dynamic router ports.
Syntax
In standalone mode:
display mld-snooping
router-port [ vlan vlan-id ] [ slot slot-number ]
In IRF mode:
display mld-snooping
router-port [ vlan vlan-id ] [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin