R211x-HP Flexfabric 11900 IP Multicast Command Reference

128
Field Descri
p
tion
Host slots (1 in total) Total number of cards where the member ports and the slot IDs of the cards.
Host ports (1 in total) Total number of member ports and the port list.
display mld-snooping static-router-port
Use display mld-snooping static-router-port to display information about static router ports.
Syntax
In standalone mode:
display mld-snooping
static-router-port [ vlan vlan-id ] [ slot slot-number ]
In IRF mode:
display mld-snooping
static-router-port [ vlan vlan-id ] [ chassis chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays
information about the static router ports on MPU. (In standalone mode.)
chassis chassis-number slot slot-number: Specifies a card on a member device. The chassis-number
argument specifies the IRF member device ID, and the slot-number argument specifies the number of the
slot where the card resides. If no member device is specified, this command displays information about
the static router ports on all MPUs in the IRF fabric. (In IRF mode.)
Examples
# Display information about the static router ports in VLAN 2.
<Sysname> display mld-snooping static-router-port vlan 2
VLAN 2:
Router slots (1 in total):
1
Router ports (2 in total):
XGE1/0/1
XGE1/0/2
Table 40 Command output
Field Descri
p
tion
VLAN 2 VLAN ID.