R211x-HP Flexfabric 11900 IP Multicast Command Reference

131
Default
MLD snooping is disabled in a VLAN.
Views
MLD-snooping view
Predefined user roles
network-admin
mdc-admin
Parameters
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN by
its ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The VLAN ID is in the range of 1 to
4094.
Examples
# Enable MLD snooping globally, and enable MLD snooping for VLAN 2 through VLAN 10.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] enable vlan 2 to 10
Related commands
• mld-snooping
• mld-snooping enable
entry-limit (MLD-snooping view)
Use entry-limit to set the global maximum number of MLD snooping forwarding entries.
Use undo entry-limit to restore the default.
Syntax
entry-limit limit
undo entry-limit
Default
The default setting is 4294967295.
Views
MLD-snooping view
Predefined user roles
network-admin
mdc-admin
Parameters
limit: Specifies the global maximum number of MLD snooping forwarding entries, in the range of 0 to
4294967295.
Examples
# Set the global maximum number of MLD snooping forwarding entries to 512.