R211x-HP Flexfabric 11900 IP Multicast Command Reference

132
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] entry-limit 512
fast-leave (MLD-snooping view)
Use fast-leave to enable MLD snooping fast-leave processing globally.
Use undo fast-leave to disable MLD snooping fast-leave processing globally.
Syntax
fast-leave [ vlan vlan-list ]
undo fast-leave [ vlan vlan-list ]
Default
MLD snooping fast-leave processing is disabled.
Views
MLD-snooping view
Predefined user roles
network-admin
mdc-admin
Parameters
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN by
its ID or a range of VLANs in the form of start-vlan-id to end-vlan-id. The VLAN ID is in the range of 1 to
4094. If this option is not specified, this command takes effect for all VLANs.
Usage guidelines
When an MLD done message arrives at a port with the MLD snooping fast-leave processing feature
enabled, the switch immediately removes that port from the forwarding entry for the multicast group
specified in the done message.
The global configuration is effective on all ports, but it has a lower priority than the configuration made
on a specific port.
Examples
# Enable MLD snooping fast-leave processing for VLAN 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] fast-leave vlan 2
Related commands
mld-snooping fast-leave
group-policy (MLD-snooping view)
Use group-policy to configure a global IPv6 multicast group filter to control the IPv6 multicast groups that
a host can join.
Use undo group-policy to remove the configured global IPv6 multicast group filter.