R211x-HP Flexfabric 11900 IP Multicast Command Reference

141
mld-snooping host-aging-time
Use mld-snooping host-aging-time to set the aging timer for the dynamic member ports in a VLAN.
Use undo mld-snooping host-aging-time to restore the default.
Syntax
mld-snooping host-aging-time interval
undo mld-snooping host-aging-time
Default
The default setting is 260 seconds.
Views
VLAN view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Sets an aging timer (in seconds) for the dynamic member ports in a VLAN, in the range of 200
to 1000.
Usage guidelines
You must enable MLD snooping for a VLAN before you configure this command for the VLAN.
The configuration made in VLAN view is only effective on the current VLAN and takes preference over the
global configuration.
Examples
# Enable MLD snooping for VLAN 2 and set the aging timer for the dynamic member ports in the VLAN
to 300 seconds.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping host-aging-time 300
Related commands
• host-aging-time (MLD-snooping view)
• mld-snooping enable
mld-snooping last-listener-query-interval
Use mld-snooping last-listener-query-interval to set the MLD last-listener query interval for a VLAN.
Use undo mld-snooping last-listener-query-interval to restore the default.
Syntax
mld-snooping last-listener-query-interval interval