R211x-HP Flexfabric 11900 IP Multicast Command Reference

145
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping router-aging-time 100
Related commands
• mld-snooping enable
• router-aging-time (MLD-snooping view)
mld-snooping source-deny
Use mld-snooping source-deny to enable IPv6 multicast source port filtering on the current port to filter
out all the received IPv6 multicast data packets. This allows the port to connect to only IPv6 multicast
receivers rather than to IPv6 multicast sources.
Use undo mld-snooping source-deny to disable IPv6 multicast source port filtering on the current port.
Syntax
mld-snooping source-deny
undo mld-snooping source-deny
Default
IPv6 multicast source port filtering is disabled, and the port can connect to both IPv6 multicast sources
and IPv6 multicast receivers.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
mdc-admin
Usage guidelines
This configuration is only effective on the current port, and it has the same priority as the global
configuration.
Examples
# Enable source port filtering for IPv6 multicast data on Ten-GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] mld-snooping source-deny
Related commands
source-deny (MLD-snooping view)
mld-snooping static-group
Use mld-snooping static-group to configure a port as a static member port of the specified IPv6 multicast
group or the specified IPv6 multicast source and group.
Use undo mld-snooping static-group to restore the default.