R211x-HP Flexfabric 11900 IP Multicast Command Reference

147
Syntax
mld-snooping static-router-port vlan vlan-id
undo mld-snooping static-router-port { all | vlan vlan-id }
Default
A port is not a static router port.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
Predefined user roles
network-admin
mdc-admin
Parameters
all: Specifies all VLANs.
vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094.
Examples
# Configure Ten-GigabitEthernet 1/0/1 in VLAN 2 as a static router port.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] mld-snooping static-router-port vlan 2
mld-snooping version
Use mld-snooping version to specify the MLD snooping version.
Use undo mld-snooping version to restore the default.
Syntax
mld-snooping version version-number
undo mld-snooping version
Default
The setting is MLDv1 snooping.
Views
VLAN view
Predefined user roles
network-admin
mdc-admin
Parameters
version-number: Specifies an MLD snooping version: 1 or 2.
Usage guidelines
You must enable MLD snooping for a VLAN before you configure this command for the VLAN.