R211x-HP Flexfabric 11900 IP Multicast Command Reference

149
Related commands
mld-snooping overflow-replace
report-aggregation (MLD-snooping view)
Use report-aggregation to enable MLD report suppression.
Use undo report-aggregation to disable MLD report suppression.
Syntax
report-aggregation
undo report-aggregation
Default
MLD report suppression is enabled.
Views
MLD-snooping view
Predefined user roles
network-admin
mdc-admin
Examples
# Disable MLD report suppression.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] undo report-aggregation
reset mld-snooping group
Use reset mld-snooping group to remove the dynamic MLD snooping forwarding entries for the specified
IPv6 multicast groups.
Syntax
reset mld-snooping group { ipv6-group-address [ ipv6-source-address ] | all } [ vlan vlan-id ]
Views
User view
Predefined user roles
network-admin
mdc-admin
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its IPv6 address. The value range for this
argument is FFxy::/16 (excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y"
represent any hexadecimal numbers from 0 to F.