R211x-HP Flexfabric 11900 IP Multicast Command Reference

151
mdc-admin
Examples
# Clear statistics for all MLD messages learned by MLD snooping.
<Sysname> reset mld-snooping statistics
Related commands
display mld-snooping statistics
router-aging-time (MLD-snooping view)
Use router-aging-time to set the global aging timer for dynamic router ports.
Use undo router-aging-time to restore the default.
Syntax
router-aging-time interval
undo router-aging-time
Default
The default setting is 260 seconds.
Views
MLD-snooping view
Predefined user roles
network-admin
mdc-admin
Parameters
interval: Specifies an aging timer (in seconds) for dynamic router ports, in the range of 1 to 1000.
Usage guidelines
The global configuration is effective on all VLANs, but it has a lower priority than the configuration made
in a specific VLAN.
Examples
# Set the global aging timer for dynamic router ports to 100 seconds.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] router-aging-time 100
Related commands
mld-snooping router-aging-time
source-deny (MLD-snooping view)
Use source-deny to enable IPv6 multicast source port filtering on specified ports to filter out all the
received IPv6 multicast data packets. This allows the ports to connect to only IPv6 multicast receivers
rather than to IPv6 multicast sources.
Use undo source-deny to disable IPv6 multicast source port filtering on specified ports.