R211x-HP Flexfabric 11900 IP Multicast Command Reference

152
Syntax
source-deny port interface-list
undo source-deny port interface-list
Default
IPv6 multicast source port filtering is disabled, and the ports can connect to both IPv6 multicast sources
and IPv6 multicast receivers.
Views
MLD-snooping view
Predefined user roles
network-admin
mdc-admin
Parameters
port interface-list: Specifies a port list. You can specify multiple ports or port ranges by providing the this
argument in the form of interface-list = { interface-type interface-number [ to interface-type
interface-number ] }.
Usage guidelines
The global configuration is effective on all specified ports, and it has the same priority as the
configuration on the current port.
Examples
# Enable source port filtering for IPv6 multicast data on ports Ten-GigabitEthernet 1/0/1 through
Ten-GigabitEthernet 1/0/4.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] source-deny port ten-gigabitethernet 1/0/1 to ten-gigabitethernet
1/0/4
Related commands
mld-snooping source-deny
version (MLD-snooping view)
Use version to specify the MLD snooping version for specified VLANs.
Use undo version to restore the default.
Syntax
version version-number vlan vlan-list
undo version vlan vlan-list
Default
The default setting is MLDv1 snooping.
Views
MLD-snooping view