R211x-HP Flexfabric 11900 IP Multicast Command Reference

Parameters

group group-address: Specifies a multicast group by its IP address. If no multicast group is specified, this

command displays information about all Layer 2 IP multicast groups.

source source-address: Specifies a multicast source by its IP address. If no multicast source is specified,

this command displays information about Layer 2 IP multicast groups for all multicast sources.

vlan vlan-id: Specifies a VLAN. The value range for the vlan-id argument is 1 to 4094. If no VLAN is

specified, this command displays information about Layer 2 IP multicast groups for all VLANs.

slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays

information about the Layer 2 IP multicast groups on the MPU. (In standalone mode.)

chassis chassis-number slot slot-number: Specifies a card on a member device. The chassis-number

argument specifies an IRF member device ID, and the slot-number argument specifies a card by its slot

number. If no member device is specified, this command displays information about Layer 2 IP multicast

groups on all MPUs in the IRF fabric. (In IRF mode.)

Examples

# Display information about the Layer 2 IP multicast groups for VLAN 2.

<Sysname> display l2-multicast ip vlan 2

Total 1 entries.

VLAN 2: Total 1 IP entries.

(0.0.0.0, 224.1.1.1)

Attribute: static, success

Host slots (1 in total):

Host ports (1 in total):

XGE1/0/1 (S, SUC)

Table 7 Command output

Field Descri

tion

Total 1 entries Total number of Layer 2 IP multicast groups.

VLAN 2: Total 1 IP entries Total number of Layer 2 IP multicast groups in VLAN 2.

(0.0.0.0, 224.1.1.1)

(S, G) entry. If the multicast source is not specified, the field in the S position

displays 0.0.0.0.

Attribute

Entry attribute:

• dynamic—The entry is created by a dynamic protocol.

• static—The entry is created by a static protocol.

• pim—The entry is created by PIM.

• kernel—The entry is obtained from the kernel.

• success—Processing succeeds.

• fail—Processing fails.

Host slots (1 in total)

Total number of cards where the member ports reside and the slot IDs of the

cards.

Host ports (1 in total) Total number of member ports and the port list.