R211x-HP Flexfabric 11900 IP Multicast Command Reference

158
Field Descri
p
tion
Total SPT switch event sent Times for which the SPT-switch event has been sent.
NoCache rate limit Rate limit for sending the NoCache event, in pps.
WrongIF rate limit
Rate limit for sending the WrongIF event, in packets per 10
seconds.
Total timer of register suppress timeout
Times for which the registration suppression has timed out in
total.
Related commands
reset ipv6 multicast forwarding event
display ipv6 multicast forwarding-table
Use display ipv6 multicast forwarding-table to display information about the IPv6 multicast forwarding
table.
Syntax
In standalone mode:
display ipv6 multicast [ vpn-instance vpn-instance-name ] forwarding-table [ ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] | incoming-interface interface-type
interface-number | outgoing-interface { exclude | include | match } interface-type interface-number |
slot slot-number | statistics ] *
In IRF mode:
display ipv6 multicast [ vpn-instance vpn-instance-name ] forwarding-table [ ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] | chassis chassis-number slot slot-number |
incoming-interface interface-type interface-number | outgoing-interface { exclude | include | match }
interface-type interface-number | statistics ] *
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If this option is not specified, the command displays information about the IPv6
multicast forwarding table on the public network.
ipv6-source-address: Specifies an IPv6 multicast source address.
ipv6-group-address: Specifies an IPv6 multicast group address in the range of FFxy::/16, where "x" and
"y" represent any hexadecimal numbers from 0 to F.