R211x-HP Flexfabric 11900 IP Multicast Command Reference

162
Field Descri
p
tion
List of 2 downstream interfaces
Downstream interface list. These interfaces must forward multicast
packets.
Related commands
reset ipv6 multicast routing-table
display ipv6 multicast rpf-info
Use display ipv6 multicast rpf-info to display RPF information for IPv6 multicast sources.
Syntax
display ipv6 multicast [ vpn-instance vpn-instance-name ] rpf-info ipv6-source-address
[ ipv6-group-address ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. If this option is not specified, the command displays RPF information for IPv6
multicast sources on the public network.
ipv6-source-address: Specifies an IPv6 multicast source address.
ipv6-group-address: Specifies an IPv6 multicast group address in the range of FFxy::/16 (excluding
FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where "x" and "y" represent any hexadecimal numbers
from 0 to F.
Examples
# Display all RPF information of the multicast source with an IPv6 address 2001::101 on the public
network.
<Sysname> display ipv6 multicast rpf-info 2001::101
RPF information about source 2001::101:
RPF interface: Vlan-interface1, RPF neighbor: FE80::A01:101:1
Referenced prefix/prefix length: 2001::/64
Referenced route type: igp
Route selection rule: preference-preferred
Load splitting rule: disable
Table 48 Command output
Field Descri
p
tion
RPF information about source 2001::101 RPF information of the IPv6 multicast source 2001::101.